Skip to main content
Fig. 2 | BMC Medical Imaging

Fig. 2

From: Distal radius plate of CFR-PEEK has minimal effect compared to titanium plates on bone parameters in high-resolution peripheral quantitative computed tomography: a pilot study

Fig. 2

Lateral scoutviews of each instrumented radius showing the region of interest (ROI) in each radius. The ROI was chosen at a location where the radius was fully covered by a part of the plate without holes and that was not intersected by screws. The tantalum fibers in the CFR-PEEK plate (left) allow visualization of the plate

Back to article page

BMC Medical Imaging

ISSN: 1471-2342

Contact us