Skip to main content
Fig. 1 | BMC Medical Imaging

Fig. 1

From: Distal radius plate of CFR-PEEK has minimal effect compared to titanium plates on bone parameters in high-resolution peripheral quantitative computed tomography: a pilot study

Fig. 1

Each volar distal radius plate was instrumented in one cadaveric forearm by means of a standard volar approach. The CFR-PEEK plate is shown in panel a and the two titanium plates in panels b and c. In each plate, five screws were fixed in the metaphysis and two screws were fixed in the shaft. The region of interest (ROI, between dotted lines) was set such that it was fully covered by a part of the plate without screws or holes

Back to article page

BMC Medical Imaging

ISSN: 1471-2342

Contact us